Dir 615 validating identity
Select Manual if you would like to control when the router is connected and disconnected from the Internet.The Connect-on-demand option allows the router to establish a connection to the Internet only when a device on your network tries to access a resource on the Internet.Static IP Address Select this option if your ISP (Internet Service Provider) has provided you with an IP address, Subnet Mask, Default Gateway, and a DNS server address. If you are unsure of what to enter in these fields, please contact your ISP.(optional) - The MAC (Media Access Control) Address field is required by some Internet Service Providers (ISP).There are two ways that you can configure your new D-Link router.You can either use the Setup Wizard or configure the settings manually.- Primary DNS (Domain Name System) server IP address, which may be provided by your ISP.
Select Always-on if you would like the router to never disconnect the PPPo E session.
It is only necessary to fill in the field if required by your ISP.
MTU (Maximum Transmission/Transfer Unit) is the largest packet size that can be sent over a network.
If you are new to networking and have never configured a router before, click on Setup Wizard and the router will guide you through a few simple steps to get your network up and running.
If you consider yourself an advanced user and have configured a router before, click Manual Configure to input all the settings manually.PPTP Select this option if your ISP uses a PPTP (Point to Point Tunneling Protocol) connection and has assigned you a username and password in order to access the Internet.